...The last thing you want to experience is damage to your Jeep that stops the fun and ends up with your Jeep being towed to the nearest dealer or repair shop. Not only does that make your day a whole lot more expensive, it's a waste of your valuable free time, and is totally preventable.
...Designed specifically for the 2003-2006 Jeep TJ Wrangler with the 2.4L, four cylinder engine, this skid plate protects the engine oil pan, the transmission, and the front portion of the exhaust. It can be used with either manual or automatic transmissions and fits on stock height or lifted Jeeps. This skid plate is 100% bolt-on and requires no drilling,... meaning that even a beginner can install it in less than an hour.
Our off-road testing showed that these engine/transmission skid plates help you get over obstacles by preventing the leading edge of your transfer case skid plate from catching on whatever you're driving over. Solidly mounted to the chassis, the smooth surface of the skid plate helps you slide over obstacles, including deep mud and snow. It's also reinforced with 1/4" thick steel angle along the driver's side to provide plenty of strength while easily clearing both your exhaust system and your driveshaft.
...because the oil drain hole lets you change the oil without needing to remove the skid plate. Any oil that spills onto the skid plate can be wiped up by reaching over the open driver's side of the skid plate.
This Skid Row Offroad Engine/Transmission Skid Plate fits your 2003-2006 Jeep TJ Wrangler with the 2.4L four cylinder engine. Designed specifically for this engine, it provides complete coverage for your vulnerable engine oil pan, transmission, AND the front portion of your exhaust system. One easily installed skid plate provides the complete protection you need for fun on the trail, while the oil drain hole lets you perform regular maintenance without needing to remove the skid plate. This skid plate is made of 3/16" thick steel that is laser cut and CNC folded for consistent quality that sets the standard for Jeep Wrangler skid plates. It is also reinforced with 1/4" thick steel angle along the driver's side to provide plenty of strength while easily clearing both your exhaust system and your driveshaft. It mounts solidly to the Jeep's frame and is designed for easy bolt-on installation, but does require drilling of 3 holes though the leading edge of the transfer case skid plate. It can be used on stock height vehicles or those with a short-arm suspension lift installed. We've also learned during our off-road testing that these engine/transmission skid plates help you get over obstacles by preventing your transfer case skid plate from catching on whatever you're driving over. So you not only get added protection and peace of mind, your Jeep will be more capable as well!
